Replacing Old or Cracking Pavers
Old paving or timber decking that's lifted, cracked or gone patchy over time gets replaced with a single poured slab that won't shift or work loose the same way.
Concrete Patios
Concrete Patios Built for Geelong Outdoor Living
Concrete Patios Built for Geelong Backyards
A concrete patio gives you a level, solid space to actually use, for entertaining, relaxing outdoors, or just giving the kids and pets somewhere solid to play. We build concrete patios across Geelong, the Bellarine Peninsula and the Surf Coast, from small courtyard patios to larger entertaining areas built to handle years of daily use.
Every patio we pour is built with proper drainage falls and expansion joints from the start, so it stays flat and crack-free long after the concrete has cured. If you're planning a new patio or replacing one that's seen better days, get in touch and we'll talk through what your space needs.
Common Situations
Common Reasons Homeowners Add a Patio
Creating Space to Entertain Outdoors
A bare patch of lawn or an awkward side yard becomes a proper spot for a table, chairs and an outdoor setting, levelled and ready for regular use.
Finishing Off a New Build or Renovation
New homes and renovations often leave the outdoor area as an afterthought. We pour the patio slab to match the rest of the property once the build is underway or complete.
Fixing Water That Pools Near the House
An old patio or paved area with the wrong fall can leave water sitting near the back door after rain. We re-pour to the correct grade so water moves away from the house instead of pooling.
A Patio You'll Actually Use
The result is a flat, solid surface that's ready for outdoor furniture, a barbecue or an outdoor setting as soon as it's cured, with no dips, wobble or standing water to work around. It gives you a proper spot to entertain, somewhere for the kids to ride bikes or set up a cubby, and a space that still looks and performs the same way years down the track.
How slip-resistant and how decorative your patio needs to be usually comes down to the finish. We pour in three main options.
Finish Options
Choosing a Finish for Your Patio
Plain finish
A smooth, trowelled surface for a clean, simple look, well suited to covered or shaded areas.
Textured finish
A lightly textured surface that adds grip underfoot, a good middle ground for entertaining areas that see bare feet and wet conditions.
Exposed aggregate finish
A decorative finish that exposes the stone within the mix, adding extra slip resistance along with a different look to plain concrete. If you want that same finish across a larger area of your property, we also pour dedicated exposed aggregate concrete surfaces.
Our Process
How We Build Your Patio
Quote and site assessment
We look at your space, talk through size, shape and the finish you want, and give you a clear quote before anything's booked in.
Forming, pour and finish
We set the patio out to the right levels and falls, pour with expansion joints built in to control cracking, then apply the finish you've chosen.
Cured and ready to use
Once it's cured, you've got a patio ready for furniture, foot traffic and everyday use, built to the falls and joint spacing it needs to stay that way.
Why Choose Us
How We Get Your Patio Right
We compact and level the base properly
We level and compact the base properly before forming the patio, so the finished surface doesn't sink or crack unevenly later.
Drainage falls and joints go in from the start
Drainage falls and expansion joints go in at the pour stage, not as an afterthought, so cracking and pooling water are designed out from the start rather than patched up after.
We match the finish to how you'll use the space
We also match the finish to how you'll actually use the space, plain for a clean look, textured or exposed aggregate where extra grip matters, and keep you in the loop on timing and yard access while the job's on.
Common Questions
Frequently asked questions
Why does concrete crack on a patio, and how do you stop it happening?
Most patio cracking comes down to a base that wasn't compacted properly, or no expansion joints to let the concrete move as the ground shifts. We level and compact the site properly before pouring, and build expansion joints in at the right spacing so the slab can move without cracking.
What's the difference between plain, textured and exposed aggregate finishes?
Plain is a smooth trowelled finish, textured adds a light grip to the surface, and exposed aggregate exposes the stone within the mix for a decorative, slip-resistant look. Which one suits your patio depends on how you'll use the space and how slip-resistant you need it to be.
How long before I can put furniture on a new patio?
Concrete is generally solid enough to walk on within a few days, though it keeps gaining strength for around four weeks. We'll give you exact timing for your job so you know when it's ready for furniture and regular use.
Can you fix a patio that's holding water after rain?
Yes, this usually means the original slab was poured with the wrong fall. We re-pour to the correct grade so water runs away from the house rather than pooling on the surface.
Get Your Free Patio Quote
Ready to get your new patio underway? Tell us about your space and we'll get back to you with a clear, itemised quote.
